|
Post by BadForeman on Sept 16, 2004 15:47:10 GMT -5
How much money have you spent on your ATV?? Mine- ATV- 2003 Honda Rancher 350 4x4 Accessories- 26" HighLifter Outlaws = $408.00 [2] 12" ITP Delta Wheels = $90.00 K&N High Flow Air Filter = $45.00 ATV 3,000 lb. Ratchet Winch = $60.00 Front & Rear Tow Hooks= $35.00 Camo SattleBag = $20.00 + Tool Box with Tools = $30.00 ----------------------------------------------- Total - $ 688.00 Humm....Just think of what it will be when I get the Foreman. ;D
|
|
|
Post by HondaForemanNo1 on Sept 16, 2004 17:42:58 GMT -5
Aaawww i just left Yasky...lol.
'03 Foreman 450S HL Lift Kit - $107 28x9 / 28x11" Titan 589s - $300 K&N w/ prefilter - $62 PivotWorks Bearings - $55 ---------------------------------- Total - $524
|
|
Ezrider
Sergeant
TBF Member
Posts: 89
|
Post by Ezrider on Sept 16, 2004 20:13:11 GMT -5
If I could remember it would prob. hurt my feelings.
|
|
|
Post by deadpresidents on Sept 17, 2004 10:42:37 GMT -5
You don't wanna know ;D
|
|
|
Post by WILD450S on Sept 17, 2004 12:45:13 GMT -5
About 2 grand extra
|
|
|
Post by BadForeman on Sept 17, 2004 14:40:05 GMT -5
DP, I wanna know! ;D
|
|
|
Post by 1badrancher on Sept 19, 2004 11:43:07 GMT -5
2001 green honda rancher 27 mudlights on itp rims- 600 lift kit- 106 dynojet kit-50 k&n filter-45 supertrapp-300 snorkels-110 ------------------ total-1211
polaris 500 h.o 6 inchlift-2000 28 mudzillas -500 snorkeles-200 ------------ total-2700
|
|
|
Post by hellbilly on Sept 22, 2004 3:39:12 GMT -5
a little bit over $150.00, moose floorboards, oil filter and some packs and bags to carry stuff in.
|
|
|
Post by deadpresidents on Sept 29, 2004 11:11:33 GMT -5
DP, I wanna know! ;D Considering I did almost everything myself and a few semi-minor repairs (cv shaft ect....), I ahve topped $4,000 Ha! I got 4200 for the sale What are u gonna do? I won't do thsat again, that is for sure!
|
|
|
Post by BadForeman on Sept 29, 2004 20:44:55 GMT -5
Dang that cheap!! I would have bought it for $4500 if I had the money. What ATV you getting now??
|
|
|
Post by XtremeForeman on Oct 5, 2004 0:48:31 GMT -5
Lets see.... XtremeProducts lift kit disc brake kits...front and rear 2" steel wheel spacers front and rear bumpers quick clean boot gaurds K&N filter and pre-filter DynoJet kit 28" Mudlites Ramsey 2500 wireless remote snorkle _______________ you really don't want to know ;D
|
|
|
Post by deadpresidents on Oct 6, 2004 8:42:44 GMT -5
got a red brute on oder...will def be in before the ned of oct!
29.5x12's alla orund on DNA's 1.5" wide tracs int he back and 1" in the front, module and winch to start her off. Make my own lift and bumpers
NExt would be snorkel and cutsom full body skid plate with integrated floorboard skids.
Clutch kit as soon as it comes out and then later on a HMF pipe.
That should be about all it will take
|
|
|
Post by KSims1868 on Oct 6, 2004 9:36:00 GMT -5
Hmm...all in all I have spent $105 on my 2002 Foreman 450ES. That was for the HL lift springs I bought last week.
Reason - The way you see it is the way I bought it. ALL this came with the Quad when I bought it and had less than 20 hours of use since installed. 26" Outlaws $425 HL Disc brakes $380 Snorkel $50 estimated cost of parts Front bumper $120 Warn 2.0 Winch $240 Axle Paddles $50 in materials - worth $200+ hell - even the Stereo (never been mounted before) and Basketball came with it. $100 (stereo/speakers)
That is about $1400 in extras.
Normally - I would have been a bit hesitant about buying a quad setup like this from someone because you KNOW that it wasn't just setup like this for LOOKS. But...in this situation...they guy had 3 quads. One of them was a Polaris 700 that had over 18" of ground clearance and it was his primary ride (mileage indicated that). This thing had barely over 100 hours on it when I bought it...so I went for it.
I'm happy with the deal.
|
|
|
Post by mountainman on Feb 25, 2005 21:57:00 GMT -5
Greetings All! I'm new hear and wanted to wish you all a happy and radical season of rock climbin' and mud slingin'! Here's the low down on $: 2000 foreman/s $2700.00 used. 1200 hours. Swampwitch 28's/$340 mounted on ITP's(rims came with the bike). Custom 2" lift/$15.00 for materials. 8 hrs of hacking and welding. Start in gear switch/ $8.00 in materials. highlifter front springs/can't remember, too drunk! 5' widening kit/$130.00. I guess that's a start.
|
|
|
Post by Foreman Rider on Feb 25, 2005 22:57:30 GMT -5
Hey Mountainman you got any pics of your Foreman?
|
|