|
Post by BostonBeaner on Sept 23, 2004 22:21:55 GMT -5
|
|
|
Post by BostonBeaner on Sept 23, 2004 22:23:25 GMT -5
I bought 2 bags.....
tell em BostonBoston sent you ...HA HA
|
|
|
Post by FLIPSTICK on Sept 25, 2004 19:17:54 GMT -5
BUY SOME 8MM WASHERS TO PUT BEHIND RIVETS , RIVETS WILL NOT COME LOOSE AGAIN
|
|
|
Post by 1badrancher on Sept 25, 2004 19:46:49 GMT -5
i said forget those rivets i just put bolts and washers on mine and the foreman
|
|
|
Post by RedSkull on Sept 25, 2004 22:00:43 GMT -5
You know, FlipStick, I never thought about that. I think I'm gonna do that tommorow. I've been having trouble with my rear left fender's rivets rattling loose all the time.
|
|
|
Post by BostonBeaner on Sept 26, 2004 19:40:42 GMT -5
Thanks for the tip
|
|
|
Post by BadForeman on Sept 29, 2004 20:53:36 GMT -5
FlipStick, Thanks for the tip!! I think i'm going to go to the hardware place tomorrow and get some of those washers. Mine are always coming loose.
|
|
|
Post by KSims1868 on Oct 5, 2004 9:38:35 GMT -5
i said forget those rivets i just put bolts and washers on mine and the foreman I did the same thing on the rear plastics...and I like the look so I'll be doing the front plastic this weekend as well. Looks very industrial and the bolts WILL NOT rattle out!!
|
|
|
Post by WILD450S on Oct 5, 2004 18:16:48 GMT -5
Bolts will wear out your colored plastic and its very expensive to replace.Just put a washer behind the plastic rivet and it will hold just fine. The rivet can become loose also and requires replacing.The black plastic fender parts are very cheap to replace. ;D
|
|
|
Post by HondaForemanNo1 on Oct 5, 2004 18:33:32 GMT -5
I had a bolt in place of one of my rivets. Left it there for about 10 months I'd say. Noticed it was real rusted and stuff, try and take it off, instead of unthreading, it decides to snap in half. I'd say the washers would be a better idea
|
|
|
Post by Foreman Rider on Oct 11, 2004 13:17:16 GMT -5
|
|