|
when
Apr 25, 2005 12:52:45 GMT -5
Post by autoguy on Apr 25, 2005 12:52:45 GMT -5
When do or you do you need to move the needle clip after installing a dynojet.
|
|
|
when
Apr 25, 2005 17:24:29 GMT -5
Post by Foreman Rider on Apr 25, 2005 17:24:29 GMT -5
After you put in the main jet and close everything on that side up. Then turn the carb around to the needle and adjust it to the 4th position it should be. After doing that make sure your sir screw is 2.5 turns out.
|
|