|
Post by Foreman Rider on Nov 24, 2004 19:56:56 GMT -5
Hey Guys, I need to find a place to buy a Warn 2.5ci 2500lb winch. I want the winch, 12' remote control, the wiring with that, if possible the mounting plate, the fairlead, and a solenoid. If you find a package including that or similar to that could you tell me the place to get it. I would be very greatful. Thanx, Ethan
|
|
|
Post by tfranklin on Nov 30, 2004 21:39:12 GMT -5
the best place to get a warn winch 2.5ci is ebay. most are brand new in the box, with a free fairlead and much much cheaper than an atv store. i found it cheaper to get the mount plate seperately online, and as for the 12' remote, why not go with a handlebar rocker switch or a wireless remote?
|
|
|
Post by SmokinRam on Dec 1, 2004 22:08:58 GMT -5
ATV Direct has every thing you want except the remote kit for $325 w/free shipping! I bought mine there.
|
|
|
Post by Foreman Rider on Dec 2, 2004 17:04:40 GMT -5
Yeah, I was lookin at ATV Direct and i really dont like ebay because i have had bad experiances with them. Thanx for the input, Ethan
|
|
|
Post by BadForeman on Dec 3, 2004 19:17:25 GMT -5
www.yaskyatv.com <<------- Best place to buy accessories!!!! They will match or beat any prices and I think even ebay prices too. Thats one of the main places I buy from and prolly will in a couple of days too!
|
|
|
Post by FLIPSTICK on Jan 9, 2005 13:56:43 GMT -5
HAVE A QUESTION FOR ANY ONE HOW HAS INSTALLED A WARN WINCH , WHICH WIRE DID YOU SPLICE INTO FOR THE KEYED 12 VOLT SOURCE ? JUST WONDERING . I'M LOOKING THROUGH THE SERVICE MANUAL'S WIRING HARNESS TO FIND THE BEST WIRE TO SPLICE TO.
|
|
|
Post by Foreman Rider on Jan 9, 2005 16:39:42 GMT -5
I think it is the group of wires that goes to the left handlebar. I think it was black with brown tracer. It is always hot so you can use it when the lights are on or off.
|
|
|
Post by FLIPSTICK on Jan 9, 2005 16:55:18 GMT -5
BY THE INSTRUCTIONS , YOU NEED A KEYED 12 VOLT SOURCE SO IT ONLY HAS POWER WHEN THE KEY IS ON , SO THAT WIRE MIGHT DO THE TRICK . THANKS
|
|
|
Post by Jake on Jan 11, 2005 18:19:35 GMT -5
The cigarette lighter harness inside the headlight pod is a very isolated (safe) circuit, and a in well protected place to have a splice.
|
|
|
Post by FLIPSTICK on Jan 30, 2005 14:38:38 GMT -5
WELL I DISASSEMBLED THE HEADLIGHT POD AND SOLDER SLICED INTO THE WHITE/BLACK WIRE AT THE ACC . PLUG AND WINCH WORKS GREAT. THANKS FOR THE HELP .
|
|