|
|
Post by 1badrancher on Sept 28, 2004 6:52:37 GMT -5
does any who has a rancher or foreman have this problem when ever you ride in sand and you try to go up just small sand hills does yalls rear axle pop. i dont ride creeks all the time but the other day i was ridding my rancher and it started poping when going up sand hills. it wont do it on dirt hills or any were else just sand. any one with some help will be gratley appreciated
|
|
|
|
Post by WILD450S on Sept 28, 2004 17:54:27 GMT -5
Check your bearings. It sounds like play caused by bad bearings and the slack is causing the bike to jump teeth in the rear end gears.not good. Check for a bad universal joint also. You don't want this thing to give out on you. It can bend your output shaft and your case will have to be split to repair.  |
|
|
|
Post by 1badrancher on Sept 28, 2004 20:18:11 GMT -5
i took it to my cusin who works on four wheelers for a living and he told me that its the bearings. and something with the uv joints. he said that when he got his foreman it did it when he had oversized tires on it.
|
|
