|
Post by Foreman Rider on Apr 17, 2005 22:16:57 GMT -5
Here is a list of all the custom work we have done to my foreman. If you want me to explain any of them dont hesitate to ask.
Reinforced Mud Flap Rivits Doubled up Mud Flap Rivits Reinforced Aluminum Products Front Bash Plate Reinforced A-Arm Brakets Maier ATV Woods Pro Cut out Aluminum Products Full Belly Diff. Hole Reinforced Handle Bars (Friends Foreman) Reinforced ES Floorboards Winch/Caribeanier Loop Spaced Aluminum Products Stik-Guards (CV Boot Guards)
There is a few I might think of 1 or 2 I forgot.
|
|
|
Post by djh1121 on Apr 18, 2005 14:57:01 GMT -5
What did you do for the rivits?
|
|
|
Post by Foreman Rider on Apr 18, 2005 22:26:58 GMT -5
|
|
|
Post by djh1121 on Apr 19, 2005 7:45:55 GMT -5
thanks...
|
|
|
Post by Foreman Rider on May 10, 2005 18:31:48 GMT -5
Reinforcin my handelbars this weekend. Ill post pics and instructions asap!!
|
|
|
Post by plowboy on May 10, 2005 19:44:16 GMT -5
That looks like alot of good stuff I might have to try one project at a time. I will do the rivet washers first.
|
|
|
Post by FLIPSTICK on May 25, 2005 3:54:03 GMT -5
Reinforcin my handelbars this weekend. Ill post pics and instructions asap!! When are you going to post some pics & instructons on this mod ?
|
|
|
Post by Foreman Rider on May 25, 2005 8:14:57 GMT -5
Well, it didnt really take much so ill just explain it to you. 1st an important thing is we have the maier aluminum hard guard and the seperate plastic peice that goes with it. We took Aluminum .25x1 flat bar and ran it acroos each aluminum guard that was still visible. We had to bend it so it would clear the master cylendar line and since mine is an ES, we just bent the choke down so that would clear also.
|
|
|
Post by FLIPSTICK on May 25, 2005 10:58:30 GMT -5
ForemanRider , thanks for the information
|
|