|
|
Post by FLIPSTICK on Aug 23, 2004 20:10:07 GMT -5
GETTING READY TO PURCHASE A SNORKIT AND WAS WONDERING WHAT TYPE OF CHANGES HAVE TO BE MADE TO RUN IT ? I ALREADY HAVE DYNO JET KIT . THANKS FOR ANY INPUT ;D
|
|
|
|
Post by WILD450S on Aug 24, 2004 6:19:41 GMT -5
Looking at your mods, I can't tell if you have a K&N. If you have a K&N you would probably run a 138dj main and the clip on the needle closest to the point(raises the needle).Without a K&N, a 136 dj main will work fine. Three turns out on the mix screw. I'm running the needle on the clip on the second notch from the bottom with 2 washers under it,138dj main,3 turns out on the mix. Runs great.
|
|
|
|
Post by FLIPSTICK on Aug 25, 2004 17:29:42 GMT -5
THANKS FOR YOUR REPLY ONCE IT COMES IN I'LL TRY THOSE SETTINGS AND SEE WHAT HAPPENS  |
|
|
|
Post by WILD450S on Aug 25, 2004 18:59:24 GMT -5
Let me know if you have any problems. I went with the 138 and nailed the main jet on the first try. That is the wide open jet. I only had to make 1 needle adjustment to get it right. I originally tried the bottom notch.   |
|
|
|
Post by BadForeman on Aug 25, 2004 19:21:49 GMT -5
What all do I need to snorkel when I get the Foreman?? Also what do I need to do after I snorkel the Foreman?? Thanks!!
Chad- BadForeman
|
|
Ezrider
Sergeant
TBF Member
Posts: 89
|
Post by Ezrider on Aug 25, 2004 20:16:46 GMT -5
Front breaks
Rear breaks
Front diff.
Rear diff.
Fan
Side of the carb
Go to walmart in the spring time, thay carry in the Garden dept. 1/4 hose and a small pack of 1/4 connectors......They are used for Gardens for running drippers to plants, Its cheep and works Great.
|
|
|
|
Post by WILD450S on Aug 25, 2004 20:26:32 GMT -5
I bought the snorkit and it is complete. It even has a drain and is the strongest and best looking snorkel for a foreman that I have seen yet. Complete instructions and easy to do. Well worth the money. Plenty of thought went into this unit.The carb vent does not go into the snorkel. I ran mine to my headlight shroud. The snorkit has the fittings on the snorkel to just remove the vents from your frame and relocate to the snorkel.Simple and well thought out. ;D |
|
|
|
Post by EZMUDDER on Aug 26, 2004 7:14:29 GMT -5
Nice site. Thanks for the compliments on the Snorkit. We've had an amazing response. Call me if you have any questions. Brad 409-670-2395 |
|
|
|
Post by FLIPSTICK on Aug 26, 2004 11:04:16 GMT -5
I AGREE , THE SNORKIT LOOKS WELL BUILT AND TAKES THE QUESS WORK OUT OF GOING TO THE POOL STORE TO GET PARTS AND IT LOOKS PPOFESSIONAL BUILT ( JUST MY TWO CENTS)
|
|
|
|
Post by BadForeman on Aug 26, 2004 13:47:00 GMT -5
I think me and my friend are going to try it. If we can't do it or don't have all the parts then i'll prolly go with the snorkit from Triangle Atv. Thanks for the help!!
Chad- BadForeman
|
|
|
|
Post by SWLAForeman on Aug 29, 2004 6:35:44 GMT -5
Is there any way to route the Snorkit without going through the front rack?
I use my front rack A LOT and I can't have a piece of PVC coming up right through the middle of it.
I developed the snorkel on my KAWA, but the Snorkit looks much nicer. It just need to be run to a different location for my purposes......
|
|
|
|
Post by WILD450S on Aug 29, 2004 19:44:09 GMT -5
I have a small basket on my front rack and the snorkit fit fine and was not in the way of the basket. |
|
|
|
Post by Nattyfied450 on Sept 1, 2004 19:18:42 GMT -5
I absolutely LOVE my snorkit! Very well designed product. Zero problems so far...
Thanks for the great job EZ!
|
|
|
|
Post by FLIPSTICK on Sept 1, 2004 19:58:01 GMT -5
OK I'VE GOT A NEUSED SNORKIT COMING BUT INSTRUCTIONS ARE MISSING . ANY ONE ABLE TO SPARE WITH A SET OR MAKE ME A COPY?
FEEL FREE TO SEND ME A MESSAGE OR E-MAIL ME ;D
|
|
|
|
Post by BostonBeaner on Sept 18, 2004 14:11:54 GMT -5
ok can anyone put up a link to this snorkel kit y'all are talking about.
tanks a rot...
BB
|
|
